Darkglass Duality Fuzz (DFZ)

Tuotenumero YDGDUAL
Darkglass Duality Fuzz (DFZ)
Level Sets the volume of the overdriven signal. Duality Mixes two discrete fuzz circuits. Set it at minimum for a pure gated saw-tooth wave, or crank it up for a tighter high gain fuzz.  Dimensions Width: 50 mm /2″ Length: 45 mm/ 1¾″ Height: 100 mm / 4″ Weight: 205 g / 0.45 lb   Warning The Duality

Tuotekuvaus

Level
Sets the volume of the overdriven signal.
Duality
Mixes two discrete fuzz circuits. Set it at minimum for a pure gated saw-tooth wave, or crank it up for a tighter high gain fuzz. 

Dimensions

Width: 50 mm /2″
Length: 45 mm/ 1¾″
Height: 100 mm / 4″
Weight: 205 g / 0.45 lb

 Warning


The Duality Fuzz has a current draw of 30 mA. Only use a regulated 9V DC adapter with a center-negative plug.
Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.

Back features
Blend

Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.

Filter

Controls the amount of high frequency content in the fuzz signal.

Technical Specifications

Input Impedance 1 MΩ
Output Impedance 100 kΩ
Current Consumption ~40 mA
Voltage 9V DC (Center Negative)

Tuotekuvaus

Kuvaus
Darkglass Duality Fuzz (DFZ)
Valmistaja
Darkglass Electronics Oy
Nettopaino
0,38
Bruttopaino
0,38

Tuotearviot (0)

Ei tuotearvioita.

Darkglass Duality Fuzz (DFZ)

Darkglass Duality Fuzz (DFZ)

Tuotenumero YDGDUAL
Level Sets the volume of the overdriven signal. Duality Mixes two discrete fuzz circuits. Set it at minimum for a pure gated saw-tooth wave, or crank it up for a tighter high gain fuzz.  Dimensions Width: 50 mm /2″ Length: 45 mm/ 1¾″ Height: 100 mm / 4″ Weight: 205 g / 0.45 lb   Warning The Duality

Tuotekuvaus

Level
Sets the volume of the overdriven signal.
Duality
Mixes two discrete fuzz circuits. Set it at minimum for a pure gated saw-tooth wave, or crank it up for a tighter high gain fuzz. 

Dimensions

Width: 50 mm /2″
Length: 45 mm/ 1¾″
Height: 100 mm / 4″
Weight: 205 g / 0.45 lb

 Warning


The Duality Fuzz has a current draw of 30 mA. Only use a regulated 9V DC adapter with a center-negative plug.
Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.

Back features
Blend

Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.

Filter

Controls the amount of high frequency content in the fuzz signal.

Technical Specifications

Input Impedance 1 MΩ
Output Impedance 100 kΩ
Current Consumption ~40 mA
Voltage 9V DC (Center Negative)

Tuotekuvaus

Kuvaus
Darkglass Duality Fuzz (DFZ)
Valmistaja
Darkglass Electronics Oy
Nettopaino
0,38
Bruttopaino
0,38

Tuotearviot (0)

Ei tuotearvioita.