Suomi (Suomi)
Sonifex AVN-AO16 Dante to 16 Mono Channel Analogue Outputs
Description
AVN-AO16 16 Output Dante® Interface, PoE
The AVN-AO16 audio converter and interface converts up to sixteen analogue outputs from the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All analogue outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.
- 16 x balanced analogue outputs on XLR.
- Adjustable global 0dBFS line up selection (+12dBu/+18dBu/+24dBu).
- 1 x RJ45 Dante connector (1 Gb/s Ethernet Port).
- PoE, Link, and Clock LED status indicators.
- Configuration using Dante Controller.
- AES67 operation & Dante Domain Manager compliant.
- Powered by PoE.
- 1U 19" rack-mount form factor.
(The AVN-AO16R is available with dual redundant Ethernet ports).
Technical Specification For AVN-AO16 | |
Network and AoIP | |
| AoIP Standard: | Dante |
| Number of Channels: | 16 receive |
| Number of Streams: | 16 receive |
| Sample Rate: | 44.1kHz, 48 kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz |
| Format: | Linear PCM, 16, 24 or 32 bit |
| AES67 Support: | Yes |
| Connectivity: | 1 x RJ45 |
| Speed: | 1Gbps or 100Mbps |
| Dante Domain Manager Ready: | Yes |
| Â | Â |
Audio Output Performance Specifications | |
| Parameter | Line Output |
| Output Impedance: | <50Ω balanced |
| 0dBFS line-up: | User Selectable +12dBu/+18dBu/+24dBu balanced |
| Frequency Response: | 20Hz to 20kHz, +0/-0.5dB |
| THD+N: | <-107dBFS, -30dBFS, 20Hz to 20kHz, 20kHz BW |
| Noise: | -107dBFS, 20kHz BW |
| Crosstalk: | <100dB |
| Â | Â |
Balanced Line Output XLR Pinout | |
| Pin | Function |
| 1 | Chassis Ground/Screen |
| 2 | Output Phase/Positive |
| 3 | Output Non-Phase/Negative |
| Â | Â |
PoE Power | |
| Standard | 802.3af |
| Class | 0 |
| PD Power Range | 0.44 W to 12.94 W |
| Typical PSE Power Usage | 7 W |
| Max PSE Power Usage | 15.4 W |
| Â | Â |
Equipment Type | |
| AVN-AO16: | 16 Output Dante® Interface, PoE |
| Â | Â |
Physical Specification | |
| Dimensions (Raw): | 48cm (W) x 11cm (D) x 4.3cm (H)(1U) 19” (W) x 4.3” (D) x 1.7” (H) |
| Weight: | Nett: 1.1kg  Gross: 1.6kg Nett: 2.4lbs  Gross: 3.5lbs |
​Linkki Sonifexin sivulle​​​
Specifications
- Description
- Sonifex AVN-AO16 Dante to 16 Mono Channel Analogue Outputs
- Manufacturer Code
- Sonifex Ltd
- Valmistaja
- Sonifex Ltd
- Net Weight
- 2
- Gross Weight
- 2
- Takuu
- 1v
Reviews (0)
There are no reviews yet.
Sonifex AVN-AO16 Dante to 16 Mono Channel Analogue Outputs
Description
AVN-AO16 16 Output Dante® Interface, PoE
The AVN-AO16 audio converter and interface converts up to sixteen analogue outputs from the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All analogue outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.
- 16 x balanced analogue outputs on XLR.
- Adjustable global 0dBFS line up selection (+12dBu/+18dBu/+24dBu).
- 1 x RJ45 Dante connector (1 Gb/s Ethernet Port).
- PoE, Link, and Clock LED status indicators.
- Configuration using Dante Controller.
- AES67 operation & Dante Domain Manager compliant.
- Powered by PoE.
- 1U 19" rack-mount form factor.
(The AVN-AO16R is available with dual redundant Ethernet ports).
Technical Specification For AVN-AO16 | |
Network and AoIP | |
| AoIP Standard: | Dante |
| Number of Channels: | 16 receive |
| Number of Streams: | 16 receive |
| Sample Rate: | 44.1kHz, 48 kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz |
| Format: | Linear PCM, 16, 24 or 32 bit |
| AES67 Support: | Yes |
| Connectivity: | 1 x RJ45 |
| Speed: | 1Gbps or 100Mbps |
| Dante Domain Manager Ready: | Yes |
| Â | Â |
Audio Output Performance Specifications | |
| Parameter | Line Output |
| Output Impedance: | <50Ω balanced |
| 0dBFS line-up: | User Selectable +12dBu/+18dBu/+24dBu balanced |
| Frequency Response: | 20Hz to 20kHz, +0/-0.5dB |
| THD+N: | <-107dBFS, -30dBFS, 20Hz to 20kHz, 20kHz BW |
| Noise: | -107dBFS, 20kHz BW |
| Crosstalk: | <100dB |
| Â | Â |
Balanced Line Output XLR Pinout | |
| Pin | Function |
| 1 | Chassis Ground/Screen |
| 2 | Output Phase/Positive |
| 3 | Output Non-Phase/Negative |
| Â | Â |
PoE Power | |
| Standard | 802.3af |
| Class | 0 |
| PD Power Range | 0.44 W to 12.94 W |
| Typical PSE Power Usage | 7 W |
| Max PSE Power Usage | 15.4 W |
| Â | Â |
Equipment Type | |
| AVN-AO16: | 16 Output Dante® Interface, PoE |
| Â | Â |
Physical Specification | |
| Dimensions (Raw): | 48cm (W) x 11cm (D) x 4.3cm (H)(1U) 19” (W) x 4.3” (D) x 1.7” (H) |
| Weight: | Nett: 1.1kg  Gross: 1.6kg Nett: 2.4lbs  Gross: 3.5lbs |
​Linkki Sonifexin sivulle​​​
Specifications
- Description
- Sonifex AVN-AO16 Dante to 16 Mono Channel Analogue Outputs
- Manufacturer Code
- Sonifex Ltd
- Valmistaja
- Sonifex Ltd
- Net Weight
- 2
- Gross Weight
- 2
- Takuu
- 1v
Reviews (0)
There are no reviews yet.